Step 1. Select Meters to Reload

Reload data from the Universal Tables into the DataMart. The following meters have been selected for reload:

Step 2. Select a Date to Reload Data From

Data for all selected meters will be reloaded from the date selected on the calendar below to today.

Step 3. Confirm Data Reload

Reloading data for selected meters will have the following impact. Confirm data reload?

Data Reloaded Successfully

The following data was reloaded successfully.

Unexpected error reloading data.

No meters selected! Select at least one meter to reload data.

• Select Phone Number and SMS Template

  
  ...
  Send SMS

Unexpected error sending SMS, there may not be a phone number assigned.

Select a meter from the meter level to send an SMS.

Unable to retrieve phone number for meter, check to see if a phone number is assigned.

Only one meter can be selected at a time!

Step 1. Select Meter to Delete

The following meter has been selected for deleteion:

Step 2. Confirm Meter Deletion

Are you certain you want to permenantly delete this meter and all associated services and register reads?

Meter Deleted Successfully

Meter with MPAN [] has been deleted successfully.

Unexpected error deleting meter.

Select a meter from the meter level to delete a meter.

No meter selected!

Only one meter can be deleted at a time!

Step 1. Select Meter to Update Status

The following meter has been selected for deleteion:

Step 2. Select New Meter Status

Select the Meter Status you want to assign to the selected meters:

Meter Status Updated Successfully

The Meter Status has been updated on the selected meters successfully. The updates may take up to 1 hour to propogate through the system.

Unexpected error updating meter status.

Select a meter from the meter level to update meter status.

No meter selected!

Step 1. Select Meter to Move

The following meter has been selected to be moved to another unit:

Step 2. Select New Unit

Select the new unit to which the meter is to be moved.

Step 3. Confirm Meter Move

Are you sure you want to move meter [] from current unit to new unit ?

Meter Moved Successfully

Meter with MPAN [] was move successfully from unit to new unit .

A dimension load is required for the changes to be reflected in the DataMart.

Unexpected error moving meter.

Select a meter from the meter level to move a meter.

No meter selected!

Only one meter can be moved at a time!

Step 1. Select Unit to Assign Geography

A geographical location will be identified for each of the following units:

Step 2. Confirm Assigned Geography

Confirm the geographical location assigned to the following units:

Geography Assigned Successfully

Geographical locations for selected units assigned successfully. A dimension load is required for changes to take affect.

Unexpected error assigning geography. Ensure address exists in istaNet for all selected units.

No units selected! Select at least one unit to assign geography.

Step 1. Select Units to Disable Module

Module will be disabled for the following units:

Step 2. Select Module to Disable

Selected module will be disabled for all selected units.

Step 3. Confirm Module Disable

module will be disabled immediately on all selected units. Confirm module disable?

Module Disabled Successfully

Module has been disabled successfully on all selected units!

Unexpected error disabling module.

No units selected! Select at least one unit to disable module.

Step 1. Select Units to Enable Module

Module will be enabled for the following units:

Step 2. Select Module to Enable

Selected module will be enabled for all selected units.

Step 3. Confirm Module Enable

module will be enabled immediately on all selected units. Confirm module enable?

Module Enabled Successfully

Module has been enabled successfully on all selected units!

Unexpected error enabling module.

No units selected! Select at least one unit to enable module.

Step 1. Select Units to Upload Budget

Budget will be uploaded and applied to the following units:

Step 2. Create Budget

Create the budget for all selected units, unit of measure will be unit specific (usually either kWh or m3):

• Jan

  
  

  Feb

  
  

  Mar

  
  

  Apr

• May

  
  

  Jun

  
  

  Jul

  
  

  Aug

• Sep

  
  

  Oct

  
  

  Nov

  
  

  Dec

Step 3. Confirm Budget Upload

Confirm upload of new budget? Budget will be applied to units immediately.

Budget Uploaded Successfully

Budget has been uploaded successfully for selected units!

Unexpected error uploading budget.

No units selected! Select at least one unit to upload budget.

Uploaded budget is invalid. Budget values must be numeric.